Abstract: | A novel dual frequency dual-polarized square microstrip patch antenna embedded with a slot is presented. The proposed antenna offers tunability of the frequency ratio between the two frequencies by adjusting the slot dimensions. This configuration also provides a size reduction up to -51 and 35% for the two modes as compared to a square micro strip patch antenna |
URI: | http://dyuthi.cusat.ac.in/purl/1371 |
Files | Size |
---|---|
Single-feed dua ... are microstrip antenna.PDF | (1.456Mb) |
Abstract: | A novel dual frequency design of a square microstrip antenna coaxially fed along the diagonal with a chip capacitor mounted at the bottom of the stub is introduced. This design provides enhanced area reduction and good cross-polarization levels. The antenna design can be used as a compact antenna system where limited size is a major requirement. The details of the antenna design and experimental results are presented |
URI: | http://dyuthi.cusat.ac.in/purl/1382 |
Files | Size |
---|---|
Slot coupled sq ... al-frequency operation.PDF | (1.351Mb) |
Abstract: | A slot line fed planar dipole antenna with a parasitic strip for wide band applications is presented. The presented antenna offers a 2:1 VSWR bandwidth from 1.66 to 2.71 GHz covering the DCS/ PCS/UMTS and IEEE 802.11b/g bands with a gain better than 6.5 dBi. The uniplanar design, simple feeding, and high gain make it a versatile antenna for wireless applications |
Description: | MICROWAVE AND OPTICAL TECHNOLOGY LETTERS / Vol. 51, No. 3, March 2009 |
URI: | http://dyuthi.cusat.ac.in/purl/4321 |
Files | Size |
---|---|
Slot Line Fed D ... Wide Band Applications.pdf | (416.4Kb) |
Abstract: | Dual frequency operation is achieved from a compact microstrip antenna by loading a pair of narrow slots close to its radiating edges. The two frequencies have parallel polarization planes and similar radiation characteristics. The ratio between the two operating frequencies can be tuned in the range (1.14-1. 24), which is much smaller than that of similar designs. The above excellent radiation characteristics are achieved along with an area reduction of - 75% compared to the standard rectangular patch |
URI: | http://dyuthi.cusat.ac.in/purl/1378 |
Files | Size |
---|---|
Slot-loaded com ... al-frequency operation.PDF | (1.081Mb) |
Abstract: | The use of a split-ring resonator (SRR)-loaded waveguide for the design of a band-rejection filter with adjustable bandwidth is reported. The width of the stopband can be adjusted by suitably positioning the SRR array in the waveguide. The rejection band can be made very narrow by placing the array at the electric-field minimum. The stopband attenuation depends on the number of unit cells in the array. |
URI: | http://dyuthi.cusat.ac.in/purl/2737 |
Files | Size |
---|---|
Dyuthi-P00371.pdf | (206.8Kb) |
Abstract: | Design and development of a new feed -horn antenna with low sidelobe levels is reported . The E-walls of this antenna are fabricated with low -loss dielectric substrate , periodically loaded with thin conducting strips . The antenna is found to be simulating the radiation characteristics of metallic corrugated horns . This can be an ideal substitute for metallic corrugated horns with added advantages like light -weight and low production cost. |
URI: | http://dyuthi.cusat.ac.in/jspui/handle/dyuthi/1562 |
Files | Size |
---|---|
A Strip-Loaded Feed-Horn Antenna.PDF | (988.8Kb) |
Abstract: | Design and development of a new feed -horn antenna with low sidelobe levels is reported . The E-walls of this antenna are fabricated with low -loss dielectric substrate , periodically loaded with thin conducting strips . The antenna is found to be simulating the radiation characteristics of metallic corrugated horns . This can be an ideal substitute for metallic corrugated horns with added advantages like light -weight and low production cost. |
URI: | http://dyuthi.cusat.ac.in/jspui/handle/dyuthi/1563 |
Files | Size |
---|---|
A Strip-Loaded Feed-Horn Antenna.PDF | (988.8Kb) |
Abstract: | Design and development of a new feed -horn antenna with low sidelobe levels is reported . The E-walls of this antenna are fabricated with low -loss dielectric substrate , periodicallyloaded with thin conducting strips . The antenna is found to be simulating the radiation characteristics of metallic Corrugated horns . This can be an ideal substitute for metallic Corrugated horns with added advantages like light -weight and low production cost |
URI: | http://dyuthi.cusat.ac.in/purl/1361 |
Files | Size |
---|---|
A Strip-Loaded Feed-Horn Antenna.PDF | (988.8Kb) |
Abstract: | The (Ba1-x Srx) (Nd1/2, Nb1/2) O3 ceramics have been prepared by the conventional ceramic route for different values of x. Addition of a small amount of CeO2(1 wt%) as a sintering aid increased the density of the samples. The structure and microstructure of the sintered samples are studied by X-ray diffraction and SEM methods. The dielectric properties of the samples are measured in the microwave frequency region as a function of composition. The dielectric constant decreases as x increases. The coefficient of thermal variation of resonant frequency decreases as the Sr content increases and goes to the negative side. The dielectric properties of (Ba1-x Srx) (Nd1/2, Nb1/2) O3 are in the range suitable for application as dielectric resonators in microwave circuits |
URI: | http://dyuthi.cusat.ac.in/purl/1438 |
Files | Size |
---|---|
Sreemoolanadhan H and others.PDF | (2.413Mb) |
URI: | http://dyuthi.cusat.ac.in/purl/967 |
Files | Size |
---|---|
Synthesis, characterisation.pdf | (357.4Kb) |
Abstract: | Microwave ceramic dielectric materials Ca5Nb2TiO12 and Ca5Ta2TiO12 have been prepared by a conventional solid-state ceramic process. The structure was studied by X-ray diffraction and the dielectric properties were characterized at microwave frequencies. The ceramics posses a relatively high dielectric constant, very low dielectric loss (Q5 x f > 30000GHz) and small temperature variation of resonant frequency. These materials are potential candidates for dielectric resonator applications in microwave integrated circuits. [DOI: 10. 1 143/JJAP.41.3834] |
URI: | http://dyuthi.cusat.ac.in/purl/1452 |
Files | Size |
---|---|
Synthesis chara ... ecommunication systems.PDF | (1.309Mb) |
Abstract: | Dielectric ceramics based on solid solution phases of [RE1_x= REr]TiNb06, where REI_s = Nd, Pr, Sm and RE' = Dy, Gd and Y, were prepared by the conventional solid-state ceramic route for values of x. The ceramic samples are characterized by X-ray diffraction and microwave methods. Ceramics based on RE (Pr, Nd and Sm) belonging to aeschynite group shows positive value of Tf and those based on RE (Gd, Dy and Y) belonging to euxenite group show negative value of r f. The solid solution phases between the aeschynite and the euxenite group shows intermediate dielectric constant and r f values. The results indicate the possibility of tailoring the dielectric properties by varying the composition of the solid solution phases. The range of solid solubility of euxenite in aeschenite and aeschenite in euxenite are different for different rare earth ions |
URI: | http://dyuthi.cusat.ac.in/purl/1449 |
Files | Size |
---|---|
Synthesis , cha ... 06 dielectric ceramics.PDF | (1.260Mb) |
Abstract: | Ceramic dielectric resonators in the BaO-RE2O3-TiO2 (RE = rare earth) system have been prepared by the conventional solid state ceramic route. The dielectric properties have been tailored by substitution of different rare earth oxides and by bismuth oxide addition. The dielectric constants increased with Bi addition whereas the 0 decreased. The temperature coefficient of the resonant frequency improved with bismuth addition |
URI: | http://dyuthi.cusat.ac.in/purl/1445 |
Files | Size |
---|---|
Tailoring the m ... mpositional variations.PDF | (4.793Mb) |
Abstract: | Microwave dielectric ceramics based on GdTiNb,-,.Ta,O6 and Sml _.,Y,TiTa06 have been prepared by conventional solid state method . The GdTiTaO6 and SmTiTaO6 have aeschenite structure with positive rr and GdTiNbO6 and YTiTaO6 have euxenite structure with negative rr. The rr of the ceramics has been tuned by preparing solid solution phases between the aeschynites and euxenites for a possible zero rr material . It is observed that GdTiNbt_YTa.,O6 undergoes a phase transition from aeschynite to euxenite when x=0.75 and in Sml-,YxTiTa06 for x= 0.73. The microwave dielectric properties change abruptly near the transition region . The rr value approaches zero near the phase transition region while the samples have poor sinterability and poor quality factor . The unloaded quality factor, dielectric constant and the sign of rr of the solid solution phases are found to depend on the average ionic radius of the rare earth ion in RE ,-5RE',TiTaO6. The boundary of the euxenite-aeschynite phase transition occurs at an average ( RE) ionic radius of 0.915 A in Sm,_, Y,.TiTaO6 solid solution phases |
URI: | http://dyuthi.cusat.ac.in/purl/1455 |
Files | Size |
---|---|
Tailoring the m ... 1 _X Y,TiTa06 ceramics.PDF | (3.705Mb) |
Abstract: | The microwave dielectric properties of ZnAl2O4 spinels were investigated and their properties were tailored by adding different mole fractions of Ti02. The samples were synthesized using the mixed oxide rout.e. The phase purity and crystal structure were identified using X-ray diffraction technique. The sintered specimens were characterized in the microwave frequency range (3-13 GHz). The ZnA12O4 ceramics exhibited interesting dielectric properties (dielectric constant (e,.) = 8.5, unloaded quality factor (Q.) = 4590 at 12.27 GHz and temperature coefficient of resonant frequency (Tf) = -79 ppm/°C). Addition of Ti02 into the spinel improved its properties and the Tf approached zero for 0.83ZnAl2O4- 0.17TiO2• This temperature compensated composition has excellent microwave dielectric properties (Cr _ 12.67, Q, = 9950 at 10.075 GHz) which can be exploited for microwave substrate applications |
URI: | http://dyuthi.cusat.ac.in/purl/1492 |
Files | Size |
---|---|
Temperature sta ... substrate applications.PDF | (3.226Mb) |
Abstract: | An ultra-wideband (UWB) printed slot antenna, suitable for integration with the printed circuit board (PCB) of a wireless universal serial-bus (WUSB) dongle is presented. The design comprises a near-rectangular slot fed by a coplanar waveguide printed on a PCB of width 20 mm. The proposed design has a large bandwidth covering the 3.1-10.6 GHz UWB band, unaffected by the ground length, and omnidirectional radiation patterns. A linear phase response throughout the band further confirms its suitability for high-speed wireless connectivity. |
URI: | http://dyuthi.cusat.ac.in/purl/2723 |
Files | Size |
---|---|
Dyuthi-P00360.pdf | (240.7Kb) |
Abstract: | A compact ultra-wideband (UWB) printed slot antenna is described, suitable for integration with the printed circuit board (PCB) of a wireless, universal, serial-bus dongle. The design comprises of a near-rectangular slot fed by a coplanar waveguide (CPW) printed on a PCB of size 20 × 30 mm2. It has a large bandwidth covering the 3.1–10.6 GHz UWB band, with omnidirectional radiation patterns. Further, a notched band centered at 5.45 GHz wireless local area network bands is obtained within the wide bandwidth by inserting a narrow slot inside the tuning stub. Details of the antenna design are described, and the experimental results of the constructed prototype are presented. The time domain studies on the antenna shows a linear phase response throughout the band except at the notched frequency. The transient analysis of the antenna indicates very little pulse distortion confirming its suitability for high speed wireless connectivity. |
URI: | http://dyuthi.cusat.ac.in/purl/2719 |
Files | Size |
---|---|
Dyuthi-P00354.pdf | (401.1Kb) |
Abstract: | In this paper, we introduce a novel feeding technique for bandwidth enhancement of a rectangular microstrip antenna This antenna offers an impedance bandwidth of 22% without degrading the effciencv. The effect of the feed parameters upon patch characteristics such as resonant frequency, impedance bandwidth, and radiation pattern are studied in detail. The experimental results are verified using the FDTD results |
URI: | http://dyuthi.cusat.ac.in/purl/1415 |
Files | Size |
---|---|
Wideband micros ... using hook-shaped feed.PDF | (1.285Mb) |
Abstract: | A broadband cylindrical dielectric resonator antenna (DRA) energized with an L-strip feed is presented The novel exciting technique achieves a 2:1 VSWR bandwidth of 18%. The variation of bandwidth for different feed parameters is also studied |
URI: | http://dyuthi.cusat.ac.in/purl/1414 |
Files | Size |
---|---|
Wideband oylind ... using an L-strip feed.PDF | (467.5Kb) |
Dyuthi Digital Repository Copyright © 2007-2011 Cochin University of Science and Technology. Items in Dyuthi are protected by copyright, with all rights reserved, unless otherwise indicated.