| Abstract: | Negative magnetic permeability media (NMPM) can be built up by using small resonant metallic particles like Split ring resonator (SRR) which has very high magnetic polarisability. A group of these particles shows a negative permeability region near and above the resonant frequency. The continuous medium parameters describing the SRR array can be predicted from their individual electromagnetic behavior near the resonances. The paper presents an optimizing software using Genetic Algorithm (GA) to design an edge coupled two ring SRR for a particular frequency |
| Description: | Recent Advances in Microwave Theory and Applications, 2008. MICROWAVE 2008. International Conference on |
| URI: | http://dyuthi.cusat.ac.in/purl/4345 |
| Files | Size |
|---|---|
| Ga Optimized Srr Calculator.pdf | (1.052Mb) |
| Abstract: | A new group of compounds with composition (Ba5-xSrx) Nb4015, having high permittivity and low loss have been prepared and characterized in the microwave frequency region . X-ray diffraction studies showed that monophase compound existed for all values of x from 0 to 5. Microwave dielectric properties such as and c f showed smooth variation with x , while the unloaded quality factor (Qu) showed remarkable improvement with x |
| URI: | http://dyuthi.cusat.ac.in/purl/1440 |
| Files | Size |
|---|---|
| Sreemoolanadhan,H & Sebastian,M.T.PDF | (1.655Mb) |
| Abstract: | The paper presents a compact planar Ultra Wide Band ¯lter employing folded stepped impedance resonators with series capacitors and dumb bell shaped defected ground structures. An interdigital quarter wavelength coupled line is used for achieving the band pass characteristics. The transmission zeros are produced by stepped impedance resonators. The ¯lter has steep roll o® rate and good attenuation in its lower and upper stop bands, contributed by the series capacitor and defected ground structures respectively. |
| Description: | Progress In Electromagnetics Research C, Vol. 49, 123{131, 2014 |
| URI: | http://dyuthi.cusat.ac.in/purl/4340 |
| Files | Size |
|---|---|
| High Selectivit ... Wide Band Applications.pdf | (423.9Kb) |
| Abstract: | Cephalopods are utilized as an important food item in various countries because of its delicacy as raw consumed food. Mainly sepia and loligo are consumed raw by Japanese and Russians. The freshness of the products is very important when the product is consumed raw. The major species that dominate our squid catch are Loligo duvaucelii and Doryteuthis sibogae. There is a noticeable difference in the quality of both the species. The needle squid (Doryteuthis sibogae ) contributes about 35% of the total squid landing. Due to the fast deterioration , a major portion of the needle squid, which is caught during the first few hauls, is thrown back to sea. The catch in the last hauls only are taken to the landing centers. At present the needle squid is processed as blanched rings and the desired quality is not obtained if it is processed as whole, whole cleaned or as tubes. In this study an attempt is made to investigate the biochemical characteristics in both the species of squid in relation to their quality and, the process control measures to be adopted. The effect of various treatments on their quality and the changes in proteolytic and lysosomal enzymes under various processing conditions are also studied in detail.Thus this study can provide the seafood industry with relevant suggestions and solutions for effective utilization of both the species of squid with emphasis on needle squid. |
| Description: | School of Industrial Fisheries, Cochin University of Science and Technology |
| URI: | http://dyuthi.cusat.ac.in/xmlui/purl/2072 |
| Files | Size |
|---|---|
| Dyuthi-T0418.pdf | (14.51Mb) |
| Abstract: | A novel technique for backscattering reduction for both TE and TM polarisation, employing a metallo-dielectric structure based on Sierpinski carpet fractal geometry, is reported. A reduction in backscattered power of --30 dB is obtained for normal incidence in the X-band for the structure using the third iterated stage of the fractal geometry |
| URI: | http://dyuthi.cusat.ac.in/purl/1406 |
| Files | Size |
|---|---|
| Low backscatter ... d on sierpinski carpet.PDF | (1.096Mb) |
| Abstract: | This paper presents the outcome of the experimental studies performed on L-strip fed compact rectangular microstrip antenna. The effect of the feed parameters upon the characteristics of the antenna is studied in detail. The antenna offers an impedance bandwidth of nearly 20% and is suitable for broadband applications |
| URI: | http://dyuthi.cusat.ac.in/purl/1412 |
| Files | Size |
|---|---|
| L-strip excited ... lar microstrip antenna.PDF | (898.2Kb) |
| Abstract: | In this paper, the advantages of using L-shaped microviij) feed to e.tcite a rectangular dielectric resonator cuuenna (DRA) by elemanagnetic coupling are presented. This feeding technique enhances the hardsvidth and gain of the antenna without affecting its size. The experimental re srdts are validated using Fidelity software based on the finitedifference tine-domain (FDTD) method |
| URI: | http://dyuthi.cusat.ac.in/purl/1425 |
| Files | Size |
|---|---|
| L-strip-fed wid ... tric resonator antenna.PDF | (932.7Kb) |
| Abstract: | A novel antenna configuration comprised of two circular micro strip antennas (CMAs) resonating in the TMtt and TM2, modes, producing radiation characteristics suitable for a mobile telephone handset, is presented. The antennas operating at the same frequency are placed back to back with a separation comparable to the thickness of a typical handset. The radiation pattern consists of a region of reduced radiation intensity, which minimizes the radiation hazards to the user |
| URI: | http://dyuthi.cusat.ac.in/purl/1369 |
| Files | Size |
|---|---|
| Microstrip ante ... uced radiation hazards.PDF | (1.152Mb) |
| Abstract: | A novel antenna configuration comprised of two circular microstrip antennas (CMAs) resonating in the TMtt and TM2, modes, producing radiation characteristics suitable for a mobile telephone handset, is presented. The antennas operating at the same frequency are placed back to back with a separation comparable to the thickness of a typical handset. The radiation pattern consists of a region of reduced radiation intensity, which minimizes the radiation hazards to the user |
| Description: | Microwave and Optical Technology Letters,VOL 23,issue 6.pp 370-372 |
| URI: | http://dyuthi.cusat.ac.in/purl/4329 |
| Files | Size |
|---|---|
| Microstrip Ante ... uced Radiation Hazards.PDF | (1.152Mb) |
| Abstract: | Design of a compact microstrip band reject filter is proposed. The device consists of an Open Loop Rectangular Resonator (OLRR) coupled to a microstrip line. The transmission line has a U-bend which enhances the coupling with the OLRR element and reduces the size of the filter. The filter can be made tunable by mounting variable capacitance to the system. Simulated and experimental results are presented. |
| URI: | http://dyuthi.cusat.ac.in/purl/2721 |
| Files | Size |
|---|---|
| Dyuthi-P00358.pdf | (225.0Kb) |
| Abstract: | Flexible and thin single layer microwave absorbers based on strontium ferrite–carbon black–nitrile rubber composites have been fabricated employing a specific recipe and their reflection loss characteristics were studied in the S (2–4 GHz) and X-bands (8–12 GHz). The incorporation of carbon black not only reinforces the rubber by improving the mechanical properties of the composite but also modifies the dielectric permittivity of the composite. Strontium ferrite when impregnated into a rubber matrix imparts the required magnetic permeability to the composite. The combination of strontium ferrite and carbon black can then be employed to tune the microwave absorption characteristics of the resulting composite. The complex dielectric permittivity and permeability were measured by employing a cavity perturbation technique. The microwave absorption characteristics of composites were modelled in that an electromagnetic wave incident normally on the metal terminated single layer absorber. The influence of filler volume fraction, frequency, absorber thickness on the bandwidth of absorption are discussed and correlated |
| Description: | Composites Science and Technology 82 (2013) 69–75 |
| URI: | http://dyuthi.cusat.ac.in/purl/4399 |
| Files | Size |
|---|---|
| A microwave abs ... nd X-band applications.pdf | (2.676Mb) |
| Abstract: | A microwave dielectric ceramic resonator based on BaCe2Ti5O15 and Ba5Nb4O15 have been prepared by conventional solid state ceramic route. The dielectric resonators (DRs) have high dielectric constant 32 and 40 for BaCe2Ti5O15 and Ba5Nb4O15, respectively. The whispering gallery mode (WGM) technique was employed for the accurate determination of the dielectric properties in the microwave frequency range. The BaCe2Ti5O15 and Ba5Nb4O15 have quality factors (Q X F) of 30,600 and 53,000 respectively. The quality factor is found to depend on the azimuthal mode numbers. The temperature coefficient of resonant frequency (Tr) of BaCe2Ti5O15 and Ba5Nb4O15 have been measured accurately using different resonant modes and are + 41 and + 78 ppm/K, respectively |
| URI: | http://dyuthi.cusat.ac.in/purl/1446 |
| Files | Size |
|---|---|
| Microwave chara ... ng gallery mode method.PDF | (2.989Mb) |
| Abstract: | The microwave dielectric properties of (I -x)CaTiO3-xSm(Mg1/2Tit,2)O3(0.1 <-x< 1.0) have been investigated. The system forms a solid solution throughout the entire compositional range. The dielectric constant decreases from 86 to 25 as x varies from 0.1 to 1.0. The Qxf varies non-linearly and increases for composition with x> 0.6. The nonmonotonic variation with composition x is more pronounced in Tt than in er. The microwave dielectric properties indicate the possibility of a phase transformation for x between 0.4 and 0.5 |
| URI: | http://dyuthi.cusat.ac.in/purl/1453 |
| Files | Size |
|---|---|
| Microwave diele ... 3 [0. 1 _x 1] ceramics.PDF | (2.946Mb) |
| Abstract: | microwave dielectric properties of ceramics based on Ba(Mgv3Ta(2-2x)t3W,t3Tixt3)O3 is investigated as a function of x. The 15 densification as well as dielectric properties deteriorate with increase in the substitution levels of (Ti 1,3W113)333 + at (Ta213)3.33+ site 16 in Ba(Mg113Ta213)03. The rt is approaching zero between x = 0.1 and 0.15 in Ba(Mg it3Ta(2-2,,.)t3W,it3Ti,Tt3)O3 where quality factor is 17 reasonably good (Qu x f = 80,000-90,000 GHz). The Ba(Mg1,3Ta(2_,013W,13Ti,,13)03 with x = 1.0 has e, = 15.4, rf= -25.1 ppm/ 18 "C, Q„ x f = 35,400 GHz |
| URI: | http://dyuthi.cusat.ac.in/purl/1488 |
| Files | Size |
|---|---|
| Microwave diele ... 3Wx3Tixf3) 03 ceramics.PDF | (3.228Mb) |
| Abstract: | The BaO-2CeO2-nTiO2 ceramics with n = 3, 4 and 5 have been prepared with CeO2 as starting material . The ceramics have been characterized using scanning electron microscopy , X-ray diffraction , Raman and X-ray photoelectron spectroscopy techniques. The microwave dielectric properties have been measured using standard dielectric resonator techniques . BaO-2CeO2-3TiO2 (123), BaO-2CeO2-4TiO2 ( 124) and BaO-2CeO2-5TiO2 ( 125) ceramics showed dielectric constants of 38, 27 and 32, respectively . All the ceramics showed fairly good unloaded Q - factors . 124 and 125 compounds exhibited low tf values, while 123 showed a high rf value |
| URI: | http://dyuthi.cusat.ac.in/purl/1493 |
| Files | Size |
|---|---|
| Microwave diele ... -2CeO2-nTiO2 ceramics.PDF | (3.306Mb) |
| Abstract: | Dielectric resonator ceramics with composition formula Ba[(D3+0.3 Bi0.2)Nb0.5]O3,where D3+=Y,Pr,Sm,Gd,Dy and Er,were prepared by the conventional ceramic preparation route |
| URI: | http://dyuthi.cusat.ac.in/purl/1441 |
| Files | Size |
|---|---|
| Microwave diele ... Y, Pr, Sm, Gd, Dy, Er).PDF | (2.529Mb) |
| Abstract: | A circular miqrostrip antenna with a modified structure is presented. By adjusting the feed location along the circumference of the patch it is possible to match the antenna with a C microstrip line of any impedance. The impedance bandwidth and radiation characteristics are unaffected by this structural V modification. |
| URI: | http://dyuthi.cusat.ac.in/purl/674 |
| Files | Size |
|---|---|
| Modified circular patch antenna Dey.pdf | (199.5Kb) |
| Abstract: | A simple technique to improve the impedance bandwidth of a circular microstrip patch antenna using two sectorial slots is proposed. Using this design more than 5% impedance bandwidth is obtained. The added advantage of this new antenna is that it can be fed by a 50 microstrip line. |
| URI: | http://dyuthi.cusat.ac.in/jspui/handle/dyuthi/1558 |
| Files | Size |
|---|---|
| A new broadband circular patch antenna.PDF | (1.429Mb) |
| Abstract: | A simple technique to improve the impedance bandwidth of a circular microstrip patch antenna using two sectorial slots is proposed. Using this design more than 5% impedance bandwidth is obtained. The added advantage of this new antenna is that it can be fed by a 50- microstrip line |
| URI: | http://dyuthi.cusat.ac.in/purl/1366 |
| Files | Size |
|---|---|
| A new broadband circular patch antenna.PDF | (1.429Mb) |
Dyuthi Digital Repository Copyright © 2007-2011 Cochin University of Science and Technology. Items in Dyuthi are protected by copyright, with all rights reserved, unless otherwise indicated.