Ramachandran,K K; Dr.Seralathan, P(cusat, April 10, 1992)
[+]
[-]
Abstract:
The continental shelf of southwest coast of India (Kerala) is broader and . flatter compared to that of the east coast. The unique characteristic feature of the study area (innershelf between Narakkal and Purakkad) is the intermittent appearance of 'mud banks' at certain locations during southwest monsoon. The strong seasonality manifests significant changes in the wind, waves, currents, rainfall, drainage etc., along this area. Peculiar geomorphological variation with high, mid and lowlands in the narrow strip of the hinterland, the geological formations mainly consisting of rocks of metamorphic origin and the humid tropical weathering conditions play significant role in regulating the shelf sedimentation.
A complementary pattern of distri bution is observed for clay that shows an abundance in the nearshore. Silt, to a major extent, depicts semblance with clay distribution . Summation of the total asymmetry of grain size distribution are inferred from the variation of skewness and kurtosis.Factor I implies a low energy regime where the transportation and deposition phases are controlled mostly by pelagic suspension process as the factor loadings are dominant on finer phi sizes. The second Factor is inferred to be the result of a high energy regime which gives higher loadings on coarser size fractions. The third Factor which might be a transition phase (medium energy regime) representing the resultant flux of coastal circulation of the re-suspension/deposition and an onshoreoffshore advection by reworking and co-deposition of relict and modern sediments. The spatial variations of the energy regime based on the three end-member factor model exhibits high energy zone in the seaward portion transcending to a low energy one towards the coast.From the combined analysis of granulometry and SEM studies, it is concluded that the sandy patches beyond 20 m depth are of relict nature. They are the resultant responses of beach activity during the lower stand of sea level in the Holocene. Re-crystallisation features on the quartz grains indicate that they were exposed to subaerial weathering process subsequent to thei r deposition
Description:
Marine Science Division, Centre for Earth Science Studies,
Thiruvananthapuram
Rajan,R V; Seralathan,P(COCHIN UNIVERSITY OF SCIENCE AND TECHNOLOGY, November , 2006)
[+]
[-]
Abstract:
The present study addresses to understand the sedimentological properties of the coasts of kodungallur and chellanam, central Kerala to bring out the relationship between the textural, mineralogical and geochemical characters with that of the respective environment. The grain size study of the beach ridge sediments from different pits has been investigated at close intervals, which enables to understand the grain size variations with depth. The sediment samples from various pits of the beach ridges indicate that the sediments range primarily from medium to very fine sand, well to moderately sorted, fine to coarse skewed and leptokurtic to platykurtic. The study area is considered as a prograding coast. Variations in grain size down the pit give three phases of beach building activities i.e.; a coarsening upward sequence in the bottom layers, a fining upward in the middle and coarsening upward in the top. Beach ridges are formed by swash built sediments with cross bedding and setting lag type sediments with seaward dipping/horizontal units.
Geochemical signatures in the study area have been brought out through the analysis of major and trace elements. Iron is significantly enriched and its control over many trace elements is evident. Copper, chromium, cobalt, lithium, lead and zinc show decreasing trend with depth, while sodium, potassium,strontium,nickel and organic carbon increases. The association of many trace elements with organic carbon has also been established. Dissolution of trace elements in anoxic environment, at depth and reprecipitation in the oxic layers, at near or subsurface, are the major mechanism that brought out the variation of certain environmentally sensitive elements
Jiby, K. Gopinath; Dr. K. Sreekumar(Cochin University of Science & Technology, July 30, 2015)
[+]
[-]
Abstract:
Polymers with conjugated π-electron backbone display unusual
electronic properties such as low energy optical transition, low ionization
potentials, and high electron affinities. The properties that make these
materials attractive include a wide range of electrical conductivity,
mechanical flexibility and thermal stability. Some of the potential
applications of these conjugated polymers are in sensors, solar cells, field
effect transistors, field emission and electrochromic displays, supercapacitors
and energy storage. With recent advances in the stability of
conjugated polymer materials, and improved control of properties, a
growing number of applications are currently being explored. Some of the
important applications of conducting polymers include: they are used in
electrostatic materials, conducting adhesives, shielding against
electromagnetic interference (EMI), artificial nerves, aircraft structures,
diodes, and transistors.
Bejoy, Varghese; Dr. Nandakumar, V.M(Cochin University of Science and Technology, December 13, 2015)
[+]
[-]
Abstract:
Semiconductor lasers with different types of feedback schemes have been an active research
area for many years. Feedback can induce complex phenomena in semiconductor
lasers and their investigations often helped to understand the inner mechanisms of the
laser. The possibility of using high dimensional chaos induced in semiconductor lasers
by delayed feedback, for secure communication systems was a major motivation for intense
research in the subject. Recently these systems also served as a testbed for general
investigations on delay dynamical systems. The present study focuses on the aspects of the
dynamical behavior of semiconductor lasers which are induced by delay feedback.
Santhosh,K R; Dr.Viswanadham,D V(Cochin University of Science and Technology, March , 1987)
[+]
[-]
Abstract:
Man's inadvertent interference with the
environment by way of indiscreL¢ industrflflization
has led to the deteriorating air quality in the recent
times. The search is on to find the remedies to
confine the air pollution levels with in their thershold
limits. Theoretical studies play A crucial role in the
control and for abatment of air pollution. Improper
siting of industry is one of the most common reasons
for the increased levels of air pollution in urban
environments. A proper and effective ecological planning
is an essential first step for any region in order to
reduce the effects of air pollution. By means of
theoretical models one can obtain the pollutant distribution
in any urban area, provided the necessary data
are available with the help of which the sites for new
industries could be suggested, given the emission
inventory. Studies on air pollution meteorology serve
and aid the planners to initate remedial actions to
bring down the levels of pollution and also to out—line
the control strategy. In the present thesis some
theoretical studies on air pollution meteorology over
South India are made. The thesis is divided into
six chapters
Description:
Physical Oceanography and Meteorology Division
School of Marine Sciences, Cochin University of Science And Technology
Rosabella,K Puthur; Sebastian, K L; Sugunan, S(Cochin University of Science and Technology, October , 2001)
[+]
[-]
Abstract:
The thesis presents the dynamics of a polymer chain under tension. It includes existing theories of polymer fracture, important theories of reaction rates, the rate using multidimensional transition state theory and apply it to the case of polyethylene etc. The main findings of the study are; the life time of the bond is somewhat sensitive to the potential lead to rather different answers, for a given potential a rough estimate of the rate can be obtained by a simples approximation that considers the dynamics of only the bond that breaks and neglects the coupling to neighboring bonds. Dynamics of neighboring bonds would decrease the rate, but usually not more than by one order of magnitude, for the breaking of polyethylene, quantum effects are important only for temperatures below 150K, the lifetime strongly depends on the strain and as the strain varies over a narrow range, the life varies rapidly from 105 seconds to 10_5 seconds, if we change one unit of the polymer by a foreign atom, say by one sulphure atom, in the main chain itself, by a weaker bond, the rate is found to increase by orders of magnitude etc.
Sunandakumari,V M; Dr.Ramanujam, N(Cochin University of Science And Technology, May , 1988)
[+]
[-]
Abstract:
During recent years, the theory of differential inequalities has been extensively used to discuss singular perturbation problems and method of lines to partial differential equations. The present thesis deals with some differential inequality theorems and their applications to singularly perturbed initial value problems, boundary value problems for ordinary differential equations
in Banach space and initial boundary value problems for parabolic differential equations. The method of lines to parabolic and elliptic differential equations are also dealt The thesis is organised into nine chapters
Description:
Department of mathematics, Cochin University of Science And Technology
Challa Ravi Kiran; Dr Sundresan, A(Cochin University of Science and Technology, June , 2015)
[+]
[-]
Abstract:
Deep fat frying process is one of the widely followed cooking practices throughout the
world. Cooking oils serve as a medium for frying food for transferring heat and makes fried
food tasty and palatable. Frying process is a most complex process involving numerous
physicochemical changes which are complicated to understand. Frying leads to thermal
degradation of oil through thermo-oxidation, hydrolysis, and polymerization. Hydrolysis
results in formation of free fatty acids whereas oxidation process produces hydroperoxides
and small molecular carbonyl compounds. This whole process leads to the formation of polar
compounds and degradation of antioxidants that further degrades frying oil. Eventually,
through mass transfer process these degradation products accumulate into fried food and
reduce the nutritional quality of both oil and food. Thus, the frying process is of research
interest calls for detailed systematic study which is chosen for the present study. The primary
objective of this study is to understand the mechanism of degradation and characterization ofdegraded products which helps in arriving at the limits for frying oil utilization in terms of
number of frying cycles. The mechanistic studies and the knowledge on the degraded
products help to understand the way to retard the deterioration of oil for stability and
enhancement of frying cycles. The study also explores the formation of the predominant
polar compounds and their structural elucidation through mass spectrometry. Oxidation of oil
is another important factor that ignites the degradation phenomena. One of the best ways to
increase thermal stability of any oil is addition of potent antioxidants. But, most of the natural
and synthetic antioxidants are unstable and ineffective at frying temperatures. Therefore, it is
necessary to screen alternative antioxidants for their activity in the refined oils which are devoid of any added antioxidants. In this context, this study discussed the efficacy of several
natural and synthetic antioxidants to retard the formation of polar compounds and thermooxidation
during prolonged frying conditions. Similarly, the advantage of blending of two
different oils to improve the thermal stability was explored. The present study brings out the
total picture on the type of degradation products formed during frying and the ways of
retarding the determination to improve upon the stability of the oil and enhancement of frying
cycles.
Bindu, J; Dr. Srinivasa Gopal, T K(Cochin University of Science and Technology., March , 2009)
[+]
[-]
Abstract:
This study is the first of its kind in India, where in smoked and thermal
processed products have been developed using locally available wood as the
source of wood smoke and flavoring and a shelf life of one year has been
achieved. Retortable pouches of three layers, both imported and indigenous
were found suitable to store thermal processed products. Heat penetration rate is
quicker in retort pouches due to their thin profile in comparison to cans and
hence the total process time is lesser. The nutritional and sensory attributes of
the pouch products are better retained during processing. Hence these products
are more acceptable than canned products. lndian vegetarian food products and
fish curry products are available in the ready to eat form in the markets. Smoked
and thermal processed products have not gained an entry to the market and
hence this study will pave an opening for such products. Currently trade in tuna
products from India is meager compared to the global trade. ln India proper
utilization of tuna resources is yet to be achieved due to the lack of infrastructure
for handling and knowledge of value addition. The raw material cost is also less
due to the poor quality of the fish when landed. Hence, the availability of such
products will help in the trade of tuna products, improving the quality of raw
material landing and ultimately realizing a better value to the fishermen and
processors.