Abstract: | Gabion faced re.taining walls are essentially semi rigid structures that can generally accommodate large lateral and vertical movements without excessive structural distress. Because of this inherent feature, they offer technical and economical advantage over the conventional concrete gravity retaining walls. Although they can be constructed either as gravity type or reinforced soil type, this work mainly deals with gabion faced reinforced earth walls as they are more suitable to larger heights. The main focus of the present investigation was the development of a viable plane strain two dimensional non linear finite element analysis code which can predict the stress - strain behaviour of gabion faced retaining walls - both gravity type and reinforced soil type. The gabion facing, backfill soil, In - situ soil and foundation soil were modelled using 20 four noded isoparametric quadrilateral elements. The confinement provided by the gabion boxes was converted into an induced apparent cohesion as per the membrane correction theory proposed by Henkel and Gilbert (1952). The mesh reinforcement was modelled using 20 two noded linear truss elements. The interactions between the soil and the mesh reinforcement as well as the facing and backfill were modelled using 20 four noded zero thickness line interface elements (Desai et al., 1974) by incorporating the nonlinear hyperbolic formulation for the tangential shear stiffness. The well known hyperbolic formulation by Ouncan and Chang (1970) was used for modelling the non - linearity of the soil matrix. The failure of soil matrix, gabion facing and the interfaces were modelled using Mohr - Coulomb failure criterion. The construction stages were also modelled.Experimental investigations were conducted on small scale model walls (both in field as well as in laboratory) to suggest an alternative fill material for the gabion faced retaining walls. The same were also used to validate the finite element programme developed as a part of the study. The studies were conducted using different types of gabion fill materials. The variation was achieved by placing coarse aggregate and quarry dust in different proportions as layers one above the other or they were mixed together in the required proportions. The deformation of the wall face was measured and the behaviour of the walls with the variation of fill materials was analysed. It was seen that 25% of the fill material in gabions can be replaced by a soft material (any locally available material) without affecting the deformation behaviour to large extents. In circumstances where deformation can be allowed to some extents, even up to 50% replacement with soft material can be possible.The developed finite element code was validated using experimental test results and other published results. Encouraged by the close comparison between the theory and experiments, an extensive and systematic parametric study was conducted, in order to gain a closer understanding of the behaviour of the system. Geometric parameters as well as material parameters were varied to understand their effect on the behaviour of the walls. The final phase of the study consisted of developing a simplified method for the design of gabion faced retaining walls. The design was based on the limit state method considering both the stability and deformation criteria. The design parameters were selected for the system and converted to dimensionless parameters. Thus the procedure for fixing the dimensions of the wall was simplified by eliminating the conventional trial and error procedure. Handy design charts were developed which would prove as a hands - on - tool to the design engineers at site. Economic studies were also conducted to prove the cost effectiveness of the structures with respect to the conventional RCC gravity walls and cost prediction models and cost breakdown ratios were proposed. The studies as a whole are expected to contribute substantially to understand the actual behaviour of gabion faced retaining wall systems with particular reference to the lateral deformations. |
Description: | Division of Civil Engineering, Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/2821 |
Files | Size |
---|---|
Dyuthi-T0841.pdf | (16.48Mb) |
Abstract: | A/though steel is most commonly used as a reinforcing material in concrete due to its competitive cost and favorable mechanical properties, the problem of corrosion of steel rebars leads to a reduction in life span of the structure and adds to maintenance costs. Many techniques have been developed in recent past to reduce corrosion (galvanizing, epoxy coating, etc.) but none of the solutions seem to be viable as an adequate solution to the corrosion problem. Apart from the use of fiber reinforced polymer (FRP) rebars, hybrid rebars consisting of both FRP and steel are also being tried to overcome the problem of steel corrosion. This paper evaluates the performance of hybrid rebars as longitudinal reinforcement in normal strength concrete beams. Hybrid rebars used in this study essentially consist of glass fiber reinforced polymer (GFRP) strands of 2 mm diameter wound helically on a mild steel core of 6 mm diameter. GFRP stirrups have been used as shear reinforcement. An attempt has been made to evaluate the flexural and shear performance of beams having hybrid rebars in normal strength concrete with and without polypropylene fibers added to the concrete matrix |
Description: | Materials and Structures 38 (December 2005) 857-864 |
URI: | http://dyuthi.cusat.ac.in/purl/4538 |
Files | Size |
---|---|
Performance of ... rmal strength concrete.pdf | (757.4Kb) |
Abstract: | Coordination among supply chain members is essential for better supply chain performance. An effective method to improve supply chain coordination is to implement proper coordination mechanisms. The primary objective of this research is to study the performance of a multi-level supply chain while using selected coordination mechanisms separately, and in combination, under lost sale and back order cases. The coordination mechanisms used in this study are price discount, delay in payment and different types of information sharing. Mathematical modelling and simulation modelling are used in this study to analyse the performance of the supply chain using these mechanisms. Initially, a three level supply chain consisting of a supplier, a manufacturer and a retailer has been used to study the combined effect of price discount and delay in payment on the performance (profit) of supply chain using mathematical modelling. This study showed that implementation of individual mechanisms improves the performance of the supply chain compared to ‘no coordination’. When more than one mechanism is used in combination, performance in most cases further improved. The three level supply chain considered in mathematical modelling was then extended to a three level network supply chain consisting of a four retailers, two wholesalers, and a manufacturer with an infinite part supplier. The performance of this network supply chain was analysed under both lost sale and backorder cases using simulation modelling with the same mechanisms: ‘price discount and delay in payment’ used in mathematical modelling. This study also showed that the performance of the supply chain is significantly improved while using combination of mechanisms as obtained earlier. In this study, it is found that the effect (increase in profit) of ‘delay in payment’ and combination of ‘price discount’ & ‘delay in payment’ on SC profit is relatively high in the case of lost sale. Sensitivity analysis showed that order cost of the retailer plays a major role in the performance of the supply chain as it decides the order quantity of the other players in the supply chain in this study. Sensitivity analysis also showed that there is a proportional change in supply chain profit with change in rate of return of any player. In the case of price discount, elasticity of demand is an important factor to improve the performance of the supply chain. It is also found that the change in permissible delay in payment given by the seller to the buyer affects the SC profit more than the delay in payment availed by the buyer from the seller. In continuation of the above, a study on the performance of a four level supply chain consisting of a manufacturer, a wholesaler, a distributor and a retailer with ‘information sharing’ as coordination mechanism, under lost sale and backorder cases, using a simulation game with live players has been conducted. In this study, best performance is obtained in the case of sharing ‘demand and supply chain performance’ compared to other seven types of information sharing including traditional method. This study also revealed that effect of information sharing on supply chain performance is relatively high in the case of lost sale than backorder. The in depth analysis in this part of the study showed that lack of information sharing need not always be resulting in bullwhip effect. Instead of bullwhip effect, lack of information sharing produced a huge hike in lost sales cost or backorder cost in this study which is also not favorable for the supply chain. Overall analysis provided the extent of improvement in supply chain performance under different cases. Sensitivity analysis revealed useful insights about the decision variables of supply chain and it will be useful for the supply chain management practitioners to take appropriate decisions. |
URI: | http://dyuthi.cusat.ac.in/purl/5020 |
Files | Size |
---|---|
Dyuthi-2086.pdf | (4.472Mb) |
URI: | http://dyuthi.cusat.ac.in/purl/636 |
Files | Size |
---|---|
B.Aubert and others,7 Nov.2002.PDF | (17.68Mb) |
Abstract: | This paper reports a novel region-based shape descriptor based on orthogonal Legendre moments. The preprocessing steps for invariance improvement of the proposed Improved Legendre Moment Descriptor (ILMD) are discussed. The performance of the ILMD is compared to the MPEG-7 approved region shape descriptor, angular radial transformation descriptor (ARTD), and the widely used Zernike moment descriptor (ZMD). Set B of the MPEG-7 CE-1 contour database and all the datasets of the MPEG-7 CE-2 region database were used for experimental validation. The average normalized modified retrieval rate (ANMRR) and precision- recall pair were employed for benchmarking the performance of the candidate descriptors. The ILMD has lower ANMRR values than ARTD for most of the datasets, and ARTD has a lower value compared to ZMD. This indicates that overall performance of the ILMD is better than that of ARTD and ZMD. This result is confirmed by the precision-recall test where ILMD was found to have better precision rates for most of the datasets tested. Besides retrieval accuracy, ILMD is more compact than ARTD and ZMD. The descriptor proposed is useful as a generic shape descriptor for content-based image retrieval (CBIR) applications |
Description: | Pattern Recognition and Image Analysis, 2008, Vol. 18, No. 1, pp. 23–29 |
URI: | http://dyuthi.cusat.ac.in/purl/4570 |
Files | Size |
---|---|
Performance Stu ... Based Shape Descriptor.pdf | (230.2Kb) |
Abstract: | Timely detection of sudden change in dynamics that adversely affect the performance of systems and quality of products has great scientific relevance. This work focuses on effective detection of dynamical changes of real time signals from mechanical as well as biological systems using a fast and robust technique of permutation entropy (PE). The results are used in detecting chatter onset in machine turning and identifying vocal disorders from speech signal.Permutation Entropy is a nonlinear complexity measure which can efficiently distinguish regular and complex nature of any signal and extract information about the change in dynamics of the process by indicating sudden change in its value. Here we propose the use of permutation entropy (PE), to detect the dynamical changes in two non linear processes, turning under mechanical system and speech under biological system.Effectiveness of PE in detecting the change in dynamics in turning process from the time series generated with samples of audio and current signals is studied. Experiments are carried out on a lathe machine for sudden increase in depth of cut and continuous increase in depth of cut on mild steel work pieces keeping the speed and feed rate constant. The results are applied to detect chatter onset in machining. These results are verified using frequency spectra of the signals and the non linear measure, normalized coarse-grained information rate (NCIR).PE analysis is carried out to investigate the variation in surface texture caused by chatter on the machined work piece. Statistical parameter from the optical grey level intensity histogram of laser speckle pattern recorded using a charge coupled device (CCD) camera is used to generate the time series required for PE analysis. Standard optical roughness parameter is used to confirm the results.Application of PE in identifying the vocal disorders is studied from speech signal recorded using microphone. Here analysis is carried out using speech signals of subjects with different pathological conditions and normal subjects, and the results are used for identifying vocal disorders. Standard linear technique of FFT is used to substantiate thc results.The results of PE analysis in all three cases clearly indicate that this complexity measure is sensitive to change in regularity of a signal and hence can suitably be used for detection of dynamical changes in real world systems. This work establishes the application of the simple, inexpensive and fast algorithm of PE for the benefit of advanced manufacturing process as well as clinical diagnosis in vocal disorders. |
Description: | Division Of Mechanical Engineering,Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/2813 |
Files | Size |
---|---|
Dyuthi-T0834.pdf | (3.827Mb) |
Abstract: | Machine tool chatter is an unfavorable phenomenon during metal cutting, which results in heavy vibration of cutting tool. With increase in depth of cut, the cutting regime changes from chatter-free cutting to one with chatter. In this paper, we propose the use of permutation entropy (PE), a conceptually simple and computationally fast measurement to detect the onset of chatter from the time series using sound signal recorded with a unidirectional microphone. PE can efficiently distinguish the regular and complex nature of any signal and extract information about the dynamics of the process by indicating sudden change in its value. Under situations where the data sets are huge and there is no time for preprocessing and fine-tuning, PE can effectively detect dynamical changes of the system. This makes PE an ideal choice for online detection of chatter, which is not possible with other conventional nonlinear methods. In the present study, the variation of PE under two cutting conditions is analyzed. Abrupt variation in the value of PE with increase in depth of cut indicates the onset of chatter vibrations. The results are verified using frequency spectra of the signals and the nonlinear measure, normalized coarse-grained information rate (NCIR). |
URI: | http://dyuthi.cusat.ac.in/purl/2598 |
Files | Size |
---|---|
Dyuthi-P0158.pdf | (263.3Kb) |
Abstract: | The purpose of personal financial management is achievement of personal financial freedom. It is a stage where finance will not be a hindrance against the fulfilment ofthe financial objectives of persons. After counting individual values and preferences we arrive at a standard or normal financial behaviour. Even though individuals differ in their tastes and preferences, there are a very large amount of commonality among them. The financial manager should list out the various financial objectives ofthe family. Then he should make the best choice from among the various alternatives on a priority based system. In short personal finance is concerned with the way in which a person manages his income and expenditure to achieve his personal financial objectives. Thus a proper personal financial planning is essential in every family for attaining financial discipline in the family. The fall ofthejoint family system, the growing financial responsibilities of modern families, limited chance ofincreasing income, growing population, financial insecurity of the government employees, lack of financial freedom, lack of proper personal financial practice and its awareness, the growing suicide rate on account offinancial crisis etc.,make the study a necessity |
Description: | School of Management Studies,Department of Commerce, Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/3378 |
Files | Size |
---|---|
Dyuthi-T1355.pdf | (5.232Mb) |
Abstract: | The study is about the Gulf-returned Keralites and their personal financial planning during the Gulf-period. The researcher has examined the nature of their income, expenditure, savings and investments during the Gulf-period and after their return. Even though the Gulf-returned Keralites had remitted huge amounts to Kerala, it appears that the majority of them are struggling hard to make both ends meet. The sample consists of 318 Gulf-returned Keralites selected by employing stratified random sampling technique, from 5 districts. After a pilot study, the data was collected through personal interviews using a structured schedule. In order to find out whether the respondents had personal financial planning during the Gulf-period, the researcher has evaluated 15 elements of personal financeusing a five-point-scale rating technique. The hypotheses were tested using correlation, t-test, chi-square and ANOVA, through SPSS. |
Description: | School of Management Studies, Cochin University of Science and Technology. |
URI: | http://dyuthi.cusat.ac.in/purl/3356 |
Files | Size |
---|---|
Dyuthi-T1333.pdf | (5.368Mb) |
Abstract: | A study on the personnel management practices in the co+operative sector in the Kerala State is carried out during the years 1989-91, with the overall objective of assessing the extent of application of modern personnel management concepts in the cooperative organizations in the Kerala State. The specific objectives of the study are to assess the effectiveness of the various personnel management practices followed in the cooperative sector, to analyse the nature and extent of compensating the employees in co—operatives, to measure the level of job satisfaction derived by the employees, to evaluate the industrial relations existing in the co-operative organizations and to suggest, if found necessary, ways and means of toning up the personnel management practices followed in the co-operative sector in Kerala |
Description: | School of Management Studies, Cochin University of Science and Technology, |
URI: | http://dyuthi.cusat.ac.in/purl/3216 |
Files | Size |
---|---|
Dyuthi-T1190.pdf | (3.416Mb) |
Abstract: | The thesis entitled Personnel Management Practices in the Kerala-Based Scheduled Commercial Banks. Personnel management function is of cardinal importance, requiring a sophisticated and scientific approach. In a labour-intensive, service industry like banking. Productivity and ultimate profitability of the entire organization depend considerably on the effectiveness with which personnel management function is executed; and the prudence with which personnel problems are handle. The main objectives of the study are to understand the current status of personnel management functions in the banks and to evaluate the practices in the light of the principles and theories of personnel management so as to identify the strengths and weaknesses. The universe of this study is the eight Scheduled Commercial Banks based in Kerala. The major limitation of the study is that as State Bank of Travancore, the lone public sector bank based in Kerala did not grant permission for collection of data, this study had to be confined to private sector banks only. Almost the entire data used for this study are primary and were collected from the files and other records or the concerned banks. This report has chapters dealing with the functional areas of personnel management such as determination of human resource requirements, recruitment and selection, training and development, performance appraisal, promotions and compensation. Findings reveal that the practice of personnel management in the Kerala-based private sector scheduled commercial banks has not gained a degree of sophistication compatible with its role in modern business management. |
Description: | School of Management studies, Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/3251 |
Files | Size |
---|---|
Dyuthi-T1225.pdf | (16.19Mb) |
Abstract: | The overall focus of the thesis involves the performer's rights in india -A study with special reference to the audiovisual industry.The performer is the disseminator of works of literary, dramatic artistic and musical authorship .The challenge of studying the audiovisual industry is the low level of data documentation and transparency in transactions compounded by the low awareness of legal issues. The first five chapters of the study trace the evolution of performers’ rights with particular impetus on three diverse jurisdictions both at the judicial and statutory levels as well as from the collective bargaining platform.The study also seeks to pin point the major obstacles that the performers have had to encounter in their quest for equal rights under the umbrella of intellectual property the world over.the status of the performer through the international instruments - the Rome convention, the WPPT and the envisaged Protocol to the audiovisual performance.A grant of rights to the performer either under Copyright or labor law need not improve matters for the performer unless the institutional grievance redressal is firmly put in place.There is a need for clearer delineation between the definitions of audio and audiovisual fixations. Under the Indian law the terms representing these have been sound records and cinematographs respectivel.Performer and the Philosophy of Intellectual Propertyeffectively. But this is not to deny the fact that these institutions, organizations and practices could very well rise to the occasion when the rights regime comes into force. |
Description: | School of Legal Studies, Cochin University of Science and Technology |
URI: | http://dyuthi.cusat.ac.in/purl/3061 |
Files | Size |
---|---|
Dyuthi-T1035.pdf | (10.77Mb) |
Abstract: | The Kerala region which forms a significant segment of the south—western Indian shield, dominantly comprises charnockites, khondalites and migmatitic gneisses of Precambrian age. Recent investigations have revealed the occurrences of a number of younger granite and syenite plutons in this region, .spatially related to regional fault—lineaments. The granite of Ambalavayal in Wynad district of northern Kerala is a typical member of this suite of intrusives. The thesis is based on a comprehensive study in terms of geology, petrology, geochemistry and petrogenesis of the Ambalavayal granite, basement gneisses, associated pegmatites, quartz veins and related mineralization that together cover an area of about 90 sq km in wynad district of northern Kerala. |
Description: | Centre for Earth Science Studies |
URI: | http://dyuthi.cusat.ac.in/purl/3791 |
Files | Size |
---|---|
Dyuthi-T1735.pdf | (18.54Mb) |
Abstract: | The Kerala region which forms a significant segment of the south—western Indian shield, dominantly comprises charnockites, khondalites and migmatitic gneisses of Precambrian age. Recent investigations have revealed the occurrences of a number of younger granite and syenite plutons in this region, .spatially related to regional fault—lineaments. The granite of Ambalavayal in Wynad district of northern Kerala is a typical member of this suite of intrusives. The thesis is based on a comprehensive study in terms of geology, petrology, geochemistry and petrogenesis of the Ambalavayal granite, basement gneisses, associated pegmatites, quartz veins and related mineralization that together cover an area of about 90 sq km in wynad district of northern Kerala |
Description: | Centre for Earth Science Studies Trivandrum |
URI: | http://dyuthi.cusat.ac.in/purl/3621 |
Files | Size |
---|---|
Dyuthi-T1601.pdf | (18.54Mb) |
URI: | http://dyuthi.cusat.ac.in/purl/1185 |
Files | Size |
---|---|
Santhosh M 1988.pdf | (1.416Mb) |
Abstract: | In the present thesis the petrographic, geochemical and digenetic variability of the sediments in the islands of Kavaratti and Minicoy has been investigated .The beach profile studies show that in the Kavaratti lagoon beach, the slope is steeper in the southern and south central part than in the northern end’s marginal deposition is taking place in the northern end of the Kavaratti island, whereas a marginal erosion is observed at the southern end. In Minicoy the slope of the lagoon beach is gentle in the south and is slightly steeper at the northern part of the beach. The southern and northern beach sections show a marginal deposition. Based on the mineralogical and geochemical studies it is concluded that the main digenetic changes observed is the transformation of aragonite to LMC.The transformation takes place mainly in the vadose zone and is caused by the abundance of fresh water infiltration. |
URI: | http://dyuthi.cusat.ac.in/purl/76 |
Files | Size |
---|---|
Dyuthi-T0184.pdf | (6.702Mb) |
Abstract: | Poly(ethylene terephthalate) (PET) based nanocomposites have been prepared with single walled carbon nanotubes (SWNTs) through an ultrasound assisted dissolution-evaporation method. Differential scanning calorimetry studies showed that SWNTs nucleate crystallization in PET at weight fractions as low as 0.3%, as the nanocomposite melt crystallized during cooling at temperature 24 °C higher than neat PET of identical molecular weight. Isothermal crystallization studies also revealed that SWNTs significantly accelerate the crystallization process. Mechanical properties of the PETSWNT nanocomposites improved as compared to neat PET indicating the effective reinforcement provided by nanotubes in the polymer matrix. Electrical conductivity measurements on the nanocomposite films showed that SWNTs at concentrations exceeding 1 wt% in the PET matrix result in electrical percolation. Comparison of crystallization, conductivity and transmission electron microscopy studies revealed that ultrasound assisted dissolution-evaporation method enables more effective dispersion of SWNTs in the PET matrix as compared to the melt compounding method |
URI: | http://dyuthi.cusat.ac.in/purl/795 |
Files | Size |
---|---|
Anoop Anand,K a ... omposites...,March2007.PDF | (5.914Mb) |
Abstract: | Synchronization in an array of mutually coupled systems with a finite time delay in coupling is studied using the Josephson junction as a model system. The sum of the transverse Lyapunov exponents is evaluated as a function of the parameters by linearizing the equation about the synchronization manifold. The dependence of synchronization on damping parameter, coupling constant, and time delay is studied numerically. The change in the dynamics of the system due to time delay and phase difference between the applied fields is studied. The case where a small frequency detuning between the applied fields is also discussed. |
URI: | http://dyuthi.cusat.ac.in/purl/2907 |
Files | Size |
---|---|
Dyuthi-P00406.pdf | (403.2Kb) |
Abstract: | A forward - biased point contact germanium signal diode placed inside a waveguide section along the E -vector is found to introduce significant phase shift of microwave signals . The usefulness of the arrangement as a phase modulator for microwave carriers is demonstrated. While there is a less significant amplitude modulation accompanying phase modulation , the insertion losses are found to be negligible. The observations can be explained on the basis of the capacitance variation of the barrier layer with forward current in the diode |
URI: | http://dyuthi.cusat.ac.in/purl/1432 |
Files | Size |
---|---|
Phase modulatio ... ermanium signal diodes.PDF | (882.1Kb) |
Abstract: | We consider an array of N Josephson junctions connected in parallel and explore the condition for chaotic synchronization. It is found that the outer junctions can be synchronized while they remain uncorrelated to the inner ones when an external biasing is applied. The stability of the solution is found out for the outer junctions in the synchronization manifold. Symmetry considerations lead to a situation wherein the inner junctions can synchronize for certain values of the parameter. In the presence of a phase difference between the applied fields, all the junctions exhibit phase synchronization. It is also found that chaotic motion changes to periodic in the presence of phase differences. |
URI: | http://dyuthi.cusat.ac.in/purl/2909 |
Files | Size |
---|---|
Dyuthi-P00408.pdf | (779.8Kb) |
Dyuthi Digital Repository Copyright © 2007-2011 Cochin University of Science and Technology. Items in Dyuthi are protected by copyright, with all rights reserved, unless otherwise indicated.